2010-2015 Camaro SS wheels on a RMW?

I have always thought the OEM wheels that came standard on the 2010 Camaro SS would look good on the wagon. I am already running a narrowed rear end and wider wheels in the back, so the staggered width doesn't bother me (20x8 in front 20x9 in the back IIRC). I am willing to run spacers if necessary, and I can either re-drill the axle hubs and rotors or use the spacers to adapt the bolt pattern. I already re-drilled so I could run 5 on 4-3/4  wheels I took off my 78 Trans Am, but I'm not sure what the newer metric bolt pattern on the camaros is exactly. What do you guys think of running these?

Those wheels should be 5x120mm bolt pattern whereas the ones on your wagon are 5x127 so you'd need adapters to run them.  You'll probably need spacers anyway depending on the offset so an adapting spacer is no problem (google says 35mm on the 8" and 40mm on the 9").

I like the look of the rim, but prefer a few more spokes myself...These are 20x9's

The offsets on the back are for sure not correct. The rear end is narrowed to run 15x10s with zero offset (5in backspacing), so I'm sure the rear spacers will have to be significantly thicker. Also, the bolt pattern has already been reduced from 5" to 4-3/4. 120mm is 4.724", which is ridiculously close to 4.75. I wonder if they are hub-centric wheels?

I have seen them on a few B-Bodies, spacers were definitely involved.