Wagonfest 2010 Parts for sale

Two rules:
1. Only post parts for sale here. If you need parts, post in the other thread.
2. Do not use this thread to contact members or ask questions. Use Private Message (PM) or email.

EDIT - DO put prices in this thread. It's at the park during the Fest where we need to not post prices.

Post away!

Electric Fan Conversion Kit:
Includes fan, motor, fuse block, and radiator shroud.

Dark Red tailgate cover, and two rear panels (spare cover and driver's side w/box).
Currently looking pretty crappy with white paint on 'em. Got replacements from JY, could bring them to a needy wagoneer. Price one cold beer per panel

PM if you need anything from my "once Fred's" inventory and my own acquisition's.

LMK what you need.

Tim

Okay, time to start my huge list.

Body Parts:
Roadmaster Wagon rubber trim that goes on the stainless steel moulding - all doors, rear fenders, rear corners, and rear door. These came off my '94 RMW. Rear fender pieces are junk but everything else is usable. $1 apiece.

Wheels:
Four American Racing AR-767 in 15x8 width. NASCAR-style. Look great on dark cars! No longer made in this arrangement. I never got the center caps although plastic 9C1-style center caps would work great on here. $180 for the whole set. Look just like this except no red stripe:


Wheels: four GM 15x8 rims off a Suburban. Come with chrome metal centercaps. $25 a wheel and $10 a centercap.

I've got a few seats from Fred (Ruphraxe) for sale, proceeds going to Fred. All prices are negotiable. All the seats are in fair to good condition. Seat mounts not included, but available for most. Sorry no pics. I will post the manufacture date on each seat if I know it.

1. RM, Ruby leather, drivers seat, w/armrest but no good, '94, fair condition, $50.00

2. RM, Ruby leather, passenger seat, 2/17/94, good condition, $50.00

3. Caprice, Grey cloth, passenger seat, 6/16/95, good condition, $50.00

4. Caprice, Ruby cloth, drivers seat, with armrest, 7/19/95, good condition, $75.00

5. Caprice, Ruby cloth, passenger seat, 7/19/95, good condition, $50.00

6. RM, Ruby limited leather, drivers seat, w/ armrest, w/heat and lumbar controls (don't know if they work), '95-'96, fair condition, 1 1/2" rip in back of
seat (behind your right shoulder area), 1/4" hole by controls, $50.00

7. RM, Ruby limited leather, passenger seat, controls there but busted up (don't know if they work), 6/13/96, fair condition, $40.00

8. Caprice, Beige cloth, passenger seat, '91-'94 ?, fair/good condition, $50.00

9. RM, Beige leather, drivers seat, no armrest, '91-'93, fair/good condition, $50.00

10. RMW, beige cloth, rear seat bottom, 4/18/94, good condition, $30.00

11. RMW, beige cloth, rear seat bottom, 10/17/94, good condition, $30.00

12. RMW, beige leather, rear seat bottom, '94, good condition, $30.00

13. RMW, beige cloth, rear seat back, '94, fair/good condition, $30.00

14. Caprice Wagon, ruby cloth, rear seat bottom, '91-'94 ?, good condition, $30.00

15. RMW/Caprice wagon, ruby vinyl, 3rd seat back w/2 carpeted panels, good/very good condition, $50.00

My own seats for sale.

1. RM, beige cloth, drivers seat w/armrest, '94, good condition (slightly dirty), $50.00

2. RM, beige cloth, passenger seat, '94, good condition (clear pvc pipe glue on seat bottom near left rear corner), $40.00

3. Caprice, gray cloth, passenger seat, out of a '92, good condition, $50.00

Thanks,
Mike

I also have alot of Dark Blue RMW TBI interior pieces, including
full set of interior door panels
Steering column with key, wheel, air bag, and both sides of wire harness connector.
have alot of trim pieces as well but big parts (tailgate panel, spare cover, etc.) are gone.

PM me if interested and I can get pics and figure out a decent price.

Also have a peanut butter cargo shade in good shape.

Really need to go inventory what I got, but it'll be at least 2 weeks before I have some free time.

You should inventory. :p That way sometime I can swing by.

[/subtle hint]

All parts are from 94 Roadmasters, shipping is extra, most $10 unless large. I will be going to WagonFest if you want to save shipping.


Cargo Area
Rear panels - $20 each---SOLD
Speaker panels - $10 each
Rear cargo handle / lights (lense have a tab broken)- $30
Wiper arm - $30
Vista Shade - $35


Interior
Visors w / mirrors - $20
Dashboard side doors and trim
Driver side - $10
Passenger side - $10
Seat bolt covers for front seat (both passenger and driver side) front and back
8 pieces total - $10
Seat bolt covers for front seat (both passenger and driver side) back only
4 pieces
Black panel for under dash, by column
2 tray units - $10 each
Ashtray unit - $10
Panel below steering wheel (blue) $10
Small blue dash piece by glove box - $5
Ashtray - $5
Kick panels - $5 each


Grey pieces
Ashtray unit - $10
Tray unit - $10---Sold
Front seat belts (both pieces)
Passenger - $40
Driver - $40
Rear door sills
Passenger - $10
Driver - $10

Odds and Ends
Wagon 3rd light for parts - $5
94 Roadmaster PCM - $45
Cruise control unit - $45
Trunk pull down, both pieces - $45
Passenger headlight and bucket - $10
Seat / Window controls
Driver - $20---Sold
Passenger - $20---Sold
Wiper motor - $25
Electric antenna for sedan - $60
Hood emblem - $15
“ROADMASTER” fender emblems - $10
91 to 94 Buick aluminum wheels center caps (3) - $15 for all
Radio / Cassette - $10---SOLD
Electronic heater controls (2) - $30 each
Wagon chrome corner piece (passenger side), has a small crease that should come
Out. - $10



Fan Shroud both pieces - $25
Home plate - $10
First base - $10
Overflow tank - $10---Sold
Windshield washer tank
Sedan - $10---pending
Wagon - $10
RMW front torsion bar - $30




“D” panels cut from wagon - $20
Tailgate glass - $40
RMW Headlight and Cornering light harness - $40

'94 4L60E and new torque converter with 100 miles on it. Alto red eagle clutches, new bushings, upgraded sunshell, all the good stuff. $500 which is a screamin' deal since a new converter is $150 alone. Can be made to work in a '95 car too (gotta tweak the PCM code via a laptop).

Anybody want some plush blue '94 Caprice wagon seats? I tried to give these away with pickup but didn't get any bites.

Anyway, they're free for anyone that wants them. I can bring them to the fest, just let me know.

Tom,

Do you still have that RM vista shade for sale? If so I may be interested in it again. We're hopefully getting an OCC for my brother and I wanna try to rig one into his car. I can wait for WF for this piece too since I already have the tray.

Thanks,

Justin

Hi Justin

I will bring the Vista Shade to WF.

Tom

silverfox103 wrote:

Hi Justin

I will bring the Vista Shade to WF.

Tom

Thanks.... dunno how that ended up on the big board, that was supposed to be a PM oh well.

Update - driver's door and fender are no longer available. On the other three doors, no one has expressed interest so I'm offering a "take them off my hands" sale. Otherwise they're going in the dumpster after WF10.

The alloy rims and tires on my '94 RMW are available. They're not gorgeous but they're not terrible either. Equipped with Kumho 235/70R15 tires, rides very nice. Roadforce balanced. Tread depth is good enough for probably another 10-15k miles, I will check tonight. Not sure what they're worth but would be glad to work a deal.

I have a couple of items to list, and I accept paypal. Thanks

Remanufactured SBC 46mm TBI bored throttle body 590cfm/340hp 350/383 $125 + shipping or you pick up
(Fits: 1987-95 SBC 5.0L/5.7L & 4.3L V6 Trucks, Z28, Firebird, Suburban, Tahoe, Astro, Yukon, Caprice, 9C1, Roadmaster, Impala)
Here is the blurb from the rebuilder:
Most GM TBI motors “flatten” out around 4000rpm and don’t make any more power.
We have engineered this GM TBI high flow throttle body which allows your motor to make power past 5500rpm & includes
GM 590cfm bored TBI w/ new throttle blades, profiled air horns, and new throttle shaft bearing
Good for 1987-95 SBC motors that make up to 340HP at 590cfm
Add our $9.99 injector spacer and get an extra 10hp
This is basically the same unit (well actually better) that CFM-Tech and Turbo City is selling for $379+ after core charge!!
I actually have one exactly like this on my olds, and it works very well. If you need additional info, just PM me.


94-96 new transmission crossmember (Can provide pic) (A bear to ship)

New Eibach Pro Kit 1.5 springs. (2 rear) $50 + shipping (heavy items) or u pick up.

They only had the kit for the sedans, and not for the wagons. Front springs worked out fine, same as sedan, but I was told that the rear was not recommended for the wagons.
So I went with bags instead.
In summary: 2 new rear end Eibach pro springs for a B body sedan

4 Winterforce G Force Tires on steel rims. 2 were only used for one winter, the other 2 for two winters.

Asking $250 OBO.

If anyone is in need of dark blue RMW TBI interior parts LMK. I don't have a car in this color but parted one awhile back so still have alot of parts including a complete steering column with wheel, air bag and key.

some pics of the haul are here:





what's not avail in above pics:
3rd seat, grille, bumper cover, sail panels, lower quarter panel, cargo area covers (tail gate and sides), lower door sill moldings (hold carpet down).

If you see something PM me, I'll dig it out and snap a pic for you.

JL Audio 12W6V2 subwoofer in a sealed box
Rockford Fosgate P3001 amp
I will also throw in a Rockford Fosgate Bass Boost controller.

This sub and amp combo sounded great, even with stock speakers in the wagon.

$400/make offer for the package.

Can't believe I am doing this but figured I would throw it out there.....

1995 White Buick RMW. 88k miles. Originally from Dallas, Texas. Mods in signature. PM me with questions or for pictures.

$4000 with Impala SS wheels, $3500 without. (Tires have less than 1,000 miles on them, wheels were re-powdercoated during the winter and have not been on the car since)

Found today while migrating 'stuff' from back of one wagon to another

Peanut butter cargo shade - 100

96 9C1 blue visors - nice 25/set
radio/hvac 'surround' with caprice logo- 20
behind dash air vent tunnel ( has outlets for all vents) probably fit all cars - 25
under the steering wheel plastic - 25
glove box door (think it has a lock) 25
160K 9c1 cluster displays fine - 45

I'm planning on tossing a few odds & ends into the back to sell/trade. Does anyone need a nice white rear bumper cover for a RMW for say $25.00? (Sold)


I also have an NOS quality N97 wheel (only the one, sorry) along with four excellent center caps and a set of new trim rings & stainless retaining capscrews I will bring along. (Sold)

Some other parts I could bring if there is any interest:

Working LT1 Caprice cluster for $50.00.

Set of 4 low mile Impala SS wheels & centercaps in excellent condition - $325.00 for everything.

Pair of LT1 aluminum heads - I'm told they were removed as part of an upgrade - $150.00

- J

Some things for sale. I have pics of most everything. Just PM me. Open to trades as well.

Electrical Items
Power Antenna - works fine, mast is dead straight, can test at the fest! $35
Underhood light cover $5
Power seat harness (OEM) for B-body - great for passenger side power seat conversion, use on Roadmaster or Caprice - $25
LT1 PCM from '95 RMW good condition $50
Headlight harness from '96 Caprice LS with cornering lights $25
Roadmaster blower control resistor module works great $20


Interior
Caprice door pull full length driver's side - wood trim includes inset with lock buttons $20
Caprice door pull full length passenger's side - wood trim includes inset with lock buttons $20
Upper seat belt B-pillar bolt cover (triangle-shaped) $4
Lower seat belt bolt cover behind front seats on center tunnel $4
Impala / Caprice door pull cap grey good condition $4
Overhead console (shortie) for RMW with temp sensors and electronics $45


Mechanical and Repair Parts
9C1 Radiator tested and holds pressure $50
Brake bracket hose front right $5
Wiper Arms Upgrade from 2000 Buick LeSabre with integrated dual sprayers $25 set
Caprice hood ornament $8
LT1 Throttle Body with all sensors $35
LT1 heater hoses with T and restrictor $20
LT1 water pump driver coupler $8

Exterior / Bodyparts / Lighting:
Hood hinge mount rust free! x2 $5 each
Headlight LF + mounting bracket $25
Taillights: from '91 Caprice wagon - very dark red surround if you're picky. FANTASTIC MINT condition, amazingly nice - $65 for the set
Tailights: from Roadmaster wagon, very very nice, black surround $25 each
Front license plate bracket for B-body $15
Roadmaster chrome corner trim under taillights $20 each side


Other
Caprice 1996 GM introduction tape in original case $10 - SOLD

For those who haven't seen my for sale thread, Im parting out a 96 White/wood RMW with tan leather interior.

https://gmlongroof.4umer.com/parts-for-sale-f7/96-rmw-part-out-in-ma-t1428.htm

All parts for sale, will be at WagonFest so I can deliver!

I have a charcoal overhead console (full length) out of a 97 blazer, no temp sensor-$25
My friend is also parting out a 97 blazer (column shift), so if you guys want anything to mod into a wagon, let me know.
Brand new mech fan tensioner -$50

Class II wagon hitch. Great condition.

$50

In addition to a bunch of seats for sale (1st pg.).

I've got a couple of cabin air filter mounts with filter. $40.00

one, grey driverside interiour A pillar out of a '92 Caprice. $10.00

Mike

Rear liftgate struts nearly new. Very strong. Normally $20+ each, $25 for the pair.
Wagon rear axle shaft. Race is perfect. These are $130 new. $50.

Here is my giant list:

Wagon parts:
Chrome trim any piece 25$. The one piece with black rubber has the black rubber scewed on from the back. Tailgate molding is spoken for.
A set of black rubber molding for a RMW, missing one on the driver side 15$
All the clips from my wagon and more 20$








Front bumper + reinforcement + grille + support + license plate bracket. The grille is spoken for.




Roadmaster cluster 40$





Also, I have the following parts still on my 91 wagon that I am parting out, and these are some things I can think of; let me know if you need something specific:

Radiator, 5 year old, 30k miles (was brand new) 40$
ported and rebuilt TBI with new TPS 50$
Caddy intake with PVC pipe painted black Summit cone filter 70$
dash bezel and 9C1 cluster wired and ready for installation. The bezel has couple of screw holes from CB mounting (tach, temp, oil and digital speedometer) will include oil pressure sensor (0-80psi) 100$
4L60 trany, shifts fine, nothing wrong with it 100$

Pictures of this wagon:











Caprice/Impala parts:

Passenger side power seat control 15$


Caprice driver side power seat rail 30$

7 of Brand new aftermarket Caprice grille 20$ ea
Brand new aftermarket headlights (with bulbs) 4 of RH and 2 of LH 20$ ea (2 sets are spoken for)
Brand new aftermarket corner lights (have a cover hole for turn illumination 5 of RH and 7 of LH 10$ ea
































Brand new aftermarket rear bumper support 40$
4 of Brand new GM bumper absorbers ACD#509-300 20$ each
















3 of Brand new GM hood struts #1010-0921 15$ ea Two Are spoken for




Brand new GM Dust shields LH and RH 20$ ea. Pending




1 Caprice power seat harness, the harness consists of connectors under the seat which are connected to the connectors in the driver door by stock wires. This is a leftover from a power window install 20$

1 3rd brake light housing 15
7 Pass side windshield A-pillar, blue (no hole some light blue some dark blue) 10

Set of 4 tan manual windows door panels from a 96 Caprice 50
Rear driver side

Rear pass side

Front driver side

Front pass side


Front 91-93 door panels
1 front pass side maroon, cloth top (93 Wagon) $20

Rear door panels fit 91-96
1 rear pass side maroon, cloth top (93 Wagon) $20

1 rear driver side maroon, cloth top (93 Wagon) $20

2 rear driver side dark blue, smooth (Sedan) $20



2 rear pass side dark blue, smooth (Sedan) $20





Door arm rest
1 rear, right, brand new (blue) 15$
1 rear, right (burgundy) 10$
1 rear, left (burgundy) 10$

4 glove compartment latch (blue and light tan) 5

Set of ARP head sutuds http://www.summitracing.com/parts/ARP-134-4001
Used on initial build up but had to go with bolts instead 70$

1 Set of 16 3/8 screw-in studs (no jam nut). 1 of the studs is used but s like new, I can throw in couple of used but good spares as well. 10$

2 of Zack's super duty lower ball joints K-615T 9/16" 30$

17" C5 Corvette wheels. Two are in great shape without tires, two are beat up with bad tires 60$ for a set.

LT1 iron heads heads 50$

bfg drag radials mounted on steel police steel rims, got some life left in them 40$

91-93 tail light lenses separated from buckets. the left side lens is good but has scratches on outside and needs to be sanded/painted. The right side needs same treatments but one of the corners is chipped and has cracks in the backup lens, that is why there are two lenses, one of them is a donor of the backup lens. These will come with buckets that need to be painted but structurally sound. Also included is the trim set. 40$ for the package (this is a project for someone)
91-93 Tail lights trim set 20$

I will have Bleeder Valves for all those who would like them.

Tim

BigBlackBeaSSt wrote:

I will have Bleeder Valves for all those who would like them.

Tim

Brass ones for the waterpump? Save one for me.

Anybody looking for a set of Buick Rally wheels? Lee W. (315 - six five six - 4211) has a set available. Don't know condition or price.

Chevrolet 454SS p/u chrome rims on CL around the corner from me.
http://rochester.craigslist.org/pts/1862568139.html

These look nice on the wagons.

I've always loved those. Put them on a 96 Suburban I had some years back. SHARP.

FYI, the SS454 had black center caps, the chrome caps mean they came off a Chevy Sport Silverado.

I like the chrome centers better. Goiod find!

-Mike

i have afew parts i can bring if someone wants them
olds cc tan velour 3rd row seat nice shape $40.00


i have a posi center in good shape taken apart and checked the cones are in great shape and have not bottomed out. $125.00

i have 2 riv consoles and shifters the tan one is real nice and originally had a cd player has 2 tiny holes in arm rest show in pic . with shifter$125.00



the blue one has the back vent part missing and the release handle for arm rest broken. the arm rest wants to stay open.with shifter$75.00

i also have an olds center cap $5.00

i have the 3rd row seat out of my 94 caprice wagon blue vynil nice shape the only thing wrong is the black plastic that goes under seat so seat belts go trew it is broke. dont see it and dont need it. $40.00
i also have map pocket for olds inice shape tan $15.00
if you are interested in any of my parts let me know by pm or email mtrhead79@aol.com i dont want to bring them if no one wants them

Free for the asking: Home Plate, First Base, & 94 to 96 tow package shroud both pieces.

tan occ seat is spoken for.

Inner fenders:
I have two driver's side inner fenders and one passenger-side inner fender, all from '92 B-bodies with the Caprice/RMW-style nose. They will fit any '91-96 Caprice, Impala, Olds Custom Cruiser or Roadmaster wagon. They may fit roadmaster sedans or fleetwoods but I don't know for sure. All are in pretty good shape, with a bit of surface rust here and there but no rust-through anywhere. They are good enough to be powdercoated and look like new. $50 each.

here is pic of map pocket and a pic of the part that is broken on my caprice 3rd row it is not the seat just as reference to what was broke see previous post

Ruby Red door panels (front and rear)
Tan passenger door panel.........
Speedo's
PCM's
sail panels
Coolant bottles
Rear tailgate inner panels (most colors)
Most all stainless trim
Most all wood trim
94 alloy wheels
doors
inner fender (passenger)
many seats
Ruby Red dash pad
dash facia's
vista shades
cargo covers
fans (both styles)
front bumper covers

Let me know what to load into the car and bring..............

i have a tpi intake it is a edelbrock lower that has 2 different head bolt patterns and factory top , mass air meter and computer injecters and fuel line and dist. here is bad part missing 6 bolts that connect runners but due have intake to head bolts and dont have module for dist. asking $250.00




i have a tube grille with the grille shell shell is not perfect but decent shape $25.00

i have my cruise module off of my wagon only has 35k on it $25.00

i have a never used deep sump oil pan for 2 pc rear main seal block has 2 trap doors in it $50.00



if you are interested in something pm or email me so i know what to bring mtrhead79@aol.com

I've got a couple or three Roadmaster Double DIN cassette radios. I think one has CD, but doesn't work. 20 bucks a piece?

i have a set of olds cc taillights in good shape $60.00 i also have 2 electric fans and shroud and brackets no bolts $40.00

Does anyone want a set of low mile - <10K - 1A2 front calipers?

Say $35.00 for the pair.

- J

sinij kot wrote:

PM sent

Hey Tim Swink, do you have a good drivers front door 94-96 RMW Ruby Red door panel for sale? The one on my 96 is cracked and I have not attempted to fiberglass it yet.

-Mike

81X11 wrote:

Hey Tim Swink, do you have a good drivers front door 94-96 RMW Ruby Red door panel for sale? The one on my 96 is cracked and I have not attempted to fiberglass it yet.

-Mike

Mike,

Sorry Passenger side only........ I thought it was a pair!!

Tim

Story of my life! Ha! Thanks for the fast reply.