Wagonfest 2010 Parts Wanted

Two rules:
1. Only post parts wanted. Do not post parts for sale.
2. Do not communicate with folks on this thread. We don't need 10 pages of banter. Send an email or a Private Message (PM).

Ask away!

Still looking for a set of OE LT1 blue floor mats in good or better condition.

DBeaSSt wrote:

Still looking for a set of OE LT1 blue floor mats in good or better condition.

Same here, for my 95 RMW.

need driver's rear door 'sail panel'. LDM preferred but will take any color.
Mine was last seen yesterday in Dillon, SC. When I arrived in Raleigh it wasn't there anymore

Looking for a right and a left rear quarter from the trimbelt down, and from the wheel well to the bumper. Color not important.

Also looking for gray (but really any color except red will do) cargo cover

92-94 RM dual armrest w/ cupholders. Gray preferred but not important.

Looking for a passenger gray cloth seat for a '94 Caprice. I need the cordaroy type, not the upscale "plush" type. Will pay big, big money! Well... big, big money for an unemployed guy.

These are similar to 9C1 seats but have cloth backs and sides. The seating area is exactly like a 9C1 seat. Like this:



Thanks in advance!

Looking for a tan vinyl driver's bench seat for my 95 Caprice. It has to be the vinyl type, trying to keep the whole 1A2 thing going.

Looking for these for 94 RMW:

--passenger side chrome trim piece that goes right under the tail light
--driver side segment of the air deflector that hangs below the bumper

Note: Both of these fell off and were lost on the way home from purchasing the car at 'Fest 2006. This was when Fred had the "less-than-detail-oriented" detail guy.

If anything falls off on the way to this year's fest, hopefully some attendee will have one!

A set of SS wheels would be nice, too.

i am looking for rear window for my caprice wagon. i want one with no rear defrost, also no scratches or damage

I could use a driver's inner fender for my 94 Caprice.

i need wheel well trim for drivers side front fender for my 94 caprice wagon without wood. i know they are different from sedans. mine has a couple dingers only want a clean dent free one thanks john

i need 1 or possibly 2 cash buyers for my wagons,.

nick

Looking for a Caprice wire wheel cap. Must be in great shape and include the center bolt.

Mike, LMK if you want me to call about this:

Caprice wheels/tires/hubcaps

anyone want to unload a set of CLEAR lenses and cornering lenses PM me with a $$$$

I could use a set of RMW rear corner mouldings (the ones under the taillights) if there are some nice ones out there.

And if anyone happened to save a set of the folded metal brackets that hold them to the body, that would be great too.

Thanks in advance,

- J

Looking for a set of N97 wheels from down south or no rust.

Tom C.

i could use a top half of the 2nd row seat for a 94 caprice wagon blue cordaroy type

silverfox103 wrote:

Looking for a set of N97 wheels from down south or no rust.

Tom C.

Hey Tom, maybe get in touch with ImpalaKid. The N97's I had one the 1a2 were in very nice shape, my stepfather had them in the garage for about 6 years before I put them on the wagon. I know he's not running them anymore, but im not sure if he still has them..

96Brougham wrote:

silverfox103 wrote:

Looking for a set of N97 wheels from down south or no rust.

Tom C.

Hey Tom, maybe get in touch with ImpalaKid. The N97's I had one the 1a2 were in very nice shape, my stepfather had them in the garage for about 6 years before I put them on the wagon. I know he's not running them anymore, but im not sure if he still has them..

I'm not sure how many sets Billy had but I just bought a set off of Doug that he said came off of one of Billy's cars.

Thanks Justin!!

Tom

silverfox103 wrote:

Thanks Justin!!

Tom

No problem. I *think* Doug has a second set when I was at his place last weekend. I got one of his sets now.

Hey guys, no communication via this thread - send PMs.

I am also looking for a caprice grille in good shape. Noticed mine has cracked mounts and has washers wedged in there to hold it on. And I also need the gas tank heat shields that go between the tank and the exhaust (between tank and rear axle) from and LT1 wagon. My passenger side one is gone, and the driver's side doesnt look too good.

Looking for solid front wheel wells.
Also, need a good front driver side RMW ruby door panel.
LMK what you got.

Quote :

(from 81X11) Now everyone knows I'd give my right arm to come to Wagonfest but it's a bit far from Texas. And I know nobody wants to ship items, but I sure would love a working power antenna if anyone wants to box one up for my '96. Mine is up....always.

-Mike

Mike, I sent you a PM.

Anybody have a right front MAB fender for a Caprice by chance?

My brother had a wheel-related incident that chewed his up pretty good.

Ideally it'll have no woodgrain, be MAB, rust free, and cheap.

Thanks in advance!

If anyone has a pass side gas tank heat shield (the one facing the front of the car, not the side) please bring it..

I got ours tied up for the time being..

I'm looking for a 30 spline Posi-traction (or similar ) differential for my wagon. Any one out there got one that can be brought to WF10? Shoot me a PM.


Thanks, Dave

lakeffect wrote:

I'm looking for a 30 spline Posi-traction (or similar ) differential for my wagon. Any one out there got one that can be brought to WF10? Shoot me a PM.


Thanks, Dave

PM sent

I am looking for an LT1 evap solenoid pipe. This damn part is near impossible to find, dealers cant get it, and RMS doesnt sell it anymore. All I really need is the rubber elbow, mine is rotted out so bad I had to cap off the port on the throttle body. Below is what it looks like.
http://www.rmsautoparts.com/proddetail.php?prod=10105324

Looking for a tan driver side visor with lighted mirrors.

thanks

Tom C.

In case anyone is looking here still...

I need a Ruby Red driver's side rear door sill and a full dash face (for an experiment). I also need the rear cargo net knobs and screws.

Free for the asking: Home Plate, First Base, & 94 to 96 tow package shroud both pieces.

A last minute thought. I need the underhood insulation for a RMW, in good condition.